In case you have a while off across the holidays this yr, that may be the right alternative for hacking on electronics. Most hobbyists have a protracted record of initiatives that they need to construct, however by no means sufficient time to construct them. So why not use a few of your trip time to examine that record twice and knock out some builds from the highest of your record?
A typical challenge topping these lists is an E Ink dashboard. If that is in your record, you is likely to be excited about a information not too long ago printed by digital engineer Marvin of MyEmbeddedStuff. Marvin confirmed simply how straightforward it may be to construct such a machine today.
The total show (📷: MyEmbeddedStuff)
A Seeed Studio reTerminal E1001 Monochrome ePaper Show was chosen for the dashboard as a result of it comprises all the pieces that’s wanted multi function package deal. It comes geared up with a 7.5-inch monochrome E Ink show, an ESP32-S3 microcontroller for processing and wi-fi connectivity, environmental sensors, and a battery that may last as long as three months on a single cost.
Within the write-up, Marvin explains how the machine could be programmed with Arduino IDE to fetch climate and calendar information from APIs. This data can then be mixed with measurements from the onboard sensors to offer an summary of each the native climate and your upcoming schedule for show on the dashboard.
The design of the firmware (📷: MyEmbeddedStuff)
Marvin additionally has some suggestions for designing and displaying graphics, and some hints about finest practices for the software program design. Check out the information to get began in your dashboard right now.
