Increase your video interfacing capabilities with the brand new SparkFun HSTX PTH Breakout and SparkFun HSTX to DVI Breakout, designed to simplify high-speed sign entry and DVI connectivity on your initiatives.
Good day everybody and welcome again to a different Friday Product Publish right here at SparkFun Electronics! Now we have one other huge week for brand new merchandise and we’re going to begin with our new HSTX and HSTX to DVI Breakouts, together with three completely different lengths of FPC Cables. Following that now we have a brand new all-band GNSS antenna, microSD card adapter, Raspberry Pi 4 case, PCB mount antenna, and FS3000 air velocity sensor module. It is so much to get by, so lets get began!
SparkFun HSTX PTH Breakout
BOB-28467
The SparkFun HSTX PTH Breakout is an easy board designed to work with the HSTX connector on the RP2350 IoT RedBoard and the digital camera and show connectors on a Raspberry Pi 5. It breaks out all 22 pins used on these connectors to an ordinary 0.1in.-spaced plated through-hole header. These 22-pin connectors interface with an identical versatile cable and usually join on to different peripherals (cameras, shows, and so on.).
SparkFun HSTX to DVI Breakout
BOB-28468
The SparkFun HSTX to DVI Breakout takes the 22-pin interface discovered on the HSTX connector on the RP2350 IoT RedBoard and the show connector on a Raspberry Pi 5 and interprets it to an HDMI connector for DVI output.
22-Pin 0.5mm Pitch FPC Cable – 5cm
CAB-28302
To enhance our new HSTX breakouts, now we have 22-pin, 50mm, 100mm, and 200mm flat versatile cables with 0.5mm pitch. It is A-B type, so pin one on one facet will match with pin one on the opposite facet. Use these 22-pin cables hook up with peripherals reminiscent of cameras, shows, and so on.
The u-blox ANN-MB2 multi-band (L1/L2/L5/E6/B3/L) energetic GNSS antenna is designed to cut back time-to-market for contemporary wide-frequency, multi-constellation, high-precision GNSS functions. Even in difficult environments, these require centimeter-level accuracy and a dependable RTK positioning repair. Its strong design, wonderful price-to-performance ratio, and versatile mounting choices make the ANN-MB2 a perfect alternative for mass market functions requiring an all-band high-precision GNSS antenna.
MicroSD Card Adapter – USB A
COM-26322
It is a primary USB A reader for all MicroSD playing cards. When you’ve got a USB A port and MicroSD card that wants learn, that is the product for you. No drivers required, only a easy connection for studying or writing to a MicroSD out of your laptop.
The Raspberry Pi 4 Case is a comfortable and safe match for Raspberry Pi 4, that is the Pink and White model. It options high-quality two-part ABS building with cut-outs for the twin micro HDMI®, Audio/Video, USB and Ethernet ports, in addition to the USB-C energy connector and entry to the microSD card. An optionally available clip-on lid may be eliminated to offer entry to your Raspberry Pi’s GPIO pins or join a HAT.
The Renesas FS3000-1015 is a surface-mount air velocity module with a variety of 0-15m/s (0-33.6mph). It makes use of a MEMS thermopile-based sensor, incorporates a digital output with 12-bit decision and includes a “stable” thermal isolation expertise and silicon carbide coating to guard it from abrasive put on and water condensation.
Speaker – PCB Mount
COM-27247
This through-hole speaker is nice for initiatives the place you want one thing that sounds higher than a piezo buzzer however haven’t got room for a full-blown speaker. This 30mm diameter speaker is encased in plastic and can deal with about 100mW of energy.
That is it for this week for us at SparkFun. As all the time, we won’t wait to see what you make! Shoot us a tweet @sparkfun, or tell us on Instagram, Fb or LinkedIn. Please be secure on the market, be type to at least one one other! Blissful hacking!
By no means miss a brand new product!
