MatterHackers’ professionals take an in-depth take a look at SeeMeCNC’s large, inexpensive delta 3D printer. The Rostock V3 continues SeeMeCNC’s line of high quality printers and printer kits.
Posted on August 25, 2017
by
Ryan Lutz
The Rostock MAX V3 printer is a delta 3D printer produced by SeeMeCNC. It’s the third model of this printer, with some scorching options so as to add much more to an already-outstanding worth. Severely – for slightly below $1,000, you possibly can’t get a comparable construct quantity with good high quality elements like you possibly can with the Rostock.
Who’s SeeMeCNC?
SeeMeCNC is an Indiana-based firm that sells and helps a spread of open supply delta 3D printers. They produce each kits and totally assembled fashions, and all documentation for constructing and calibrating the printers can be found on-line. Why are their printers totally different? As an open supply producer, they’ve helped decrease the associated fee barrier to the consumer-level 3D printing market.
Options
Computerized mattress leveling makes printing with the Rostock fast and straightforward; the jet equipment add-on for the HE280 hotend permits the printer to achieve temperatures excessive sufficient to print nylons and polycarbonate; three cooling followers guarantee sufficient cooling all the way in which across the print; and a slight total redesign relocated the electronics to be above the construct plate for simpler cable routing and higher efficiency.
- Computerized mattress leveling
- Higher cooling
- Excessive-temperature add-on equipment
Computerized Mattress Leveling
One of the best new characteristic on the Rostock V3 is the leveling. Lengthy awaited, its arrival for the Rostock was closely anticipated, and to its credit score has solved a lot of the points that stem from having a print mattress that isn’t degree. A easy G29 command runs all the leveling sequence, which takes lower than a minute, and leaves your printer able to print any half, degree on the mattress.
Probe
The nozzle is the precise probe, and the change is contained within the higher, LED-laden half on the high of the recent finish that provides the V3 an added cool aesthetic high quality that wasn’t current in earlier variations.
Watch it in a darkish room! 🙂
Higher cooling
Three cooling followers, in a triangle configuration, hold elements cooled evenly all the way in which round. It’s an enchancment over the earlier Rostock, which solely had one fan, off to the appropriate.
Spiral vase mode is saved!
Hello-Temp Jet Package Add-on
The inventory setup will enable the printer to hit temperatures as much as about 260, which is scorching sufficient to print most sorts of filament obtainable.
With the HE 280 Jet Package add-on (offered individually right here), the recent finish will attain a most of 280, permitting for the printing of Nylon filaments. It’s a must have if you wish to maximize the printer’s filament capabilities.
Why Would You Need This Delta 3D Printer?
The Rostock MAX V3 is a stable worth, so for construct quantity vs. MSRP, you received’t possible discover a high quality competitor. Different SeeMeCNC delta printers are superior, too – the Orion, and even the little PLA-only Eris – however they lack the candy worth of the Rostock providing. Different producer’s delta machines are hit or miss. We haven’t actually seen one other equipment come round just like the Rostock.
Rostock MAX V3 Package vs. Absolutely Assembled
Prospects usually ask about the benefits of shopping for the equipment over shopping for the assembled model of the Rostock MAX V3. Personally, if I’m advising somebody about which printer to purchase, they usually’re on the fence about constructing the equipment vs. shopping for the assembled model, I usually advocate the equipment, which is slightly below $1,000.
For an additional $599, certain, you will get the printer pre-assembled for you, which could be a fantastic time-saver– and in sure instances, is actually a bonus. Nevertheless, if you wish to avoid wasting cash, or have further time, shopping for the equipment model will provide you with the expertise of placing the printer collectively piece-by-piece, which most frequently ends in a extra intimate understanding of the printer and its inside workings. When (not if) issues go flawed, you’ll know the way to troubleshoot, because you already know the way all the things works. Directions are clear and straightforward to comply with, and assist is obtainable in case you get caught. There’s actually no draw back.
Why The Rostock Package Is The Most Bang For Your Buck
The Rostock MAX V3 equipment is the perfect worth at slightly below $1,000 for 3D printer with an infinite construct quantity in comparison with similarly-priced choices of the identical high quality. The meeting directions are clear and easy-to-follow, the elements are well-made, and because of its open supply nature, the printer is well-supported.
Delta 3D Printer vs. Cartesian 3D Printer
The principle benefit of a delta printer over a Cartesian is pace. Delta printers can function at greater speeds because of their totally different orientation of motors, pulleys, and belts. That mentioned, elevated pace doesn’t essentially translate to raised prints– greater high quality is usually gotten at slower speeds. Quicker simply means extra prints in much less time.
Conclusion
The most recent model of the Rostock MAX from SeeMeCNC retains the road’s nice worth (finest within the type of the equipment!) with an superior open supply tradition and nice documentation.
Choose up one immediately from MatterHackers!
Completely happy Delta Printing!
