This week, the STC31 appears good in SparkFun Pink, and we have now three new GNSS Flex Modules that you would be able to swap into your subsequent PNT mission!
Hey everybody and welcome again to a different Friday Product Submit right here at SparkFun Electronics! We’ve 4 huge ticket merchandise that we’re excited to share with you, and it begins with the most recent graduate from the SparkX model: the Qwiic STC31 CO2 Sensor! This little board is without doubt one of the most correct environmental sensors able to studying and offering knowledge in a number of the most excessive environments. Following that, we have now three new GNSS Flex Modules two of that are geared up with the brand new ZED-X20P each with and with out an IM19 IMU, the third geared up with and LG290P and an IM19 IMU. Following these shiny new merchandise, we have now three new Step-Down Voltage Regulators from Pololu, after which extra ICs from SparkFun inventory!
Have to measure excessive concentrations of carbon dioxide? When customary CO2 sensors will not minimize it, the SparkFun Qwiic STC31 Sensor is your answer. This highly effective sensor from Sensirion is designed to measure CO2 concentrations all the best way as much as a staggering 100% quantity!
The STC31 is constructed for functions the place reliability is vital. It makes use of a revolutionary thermal conductivity measurement precept, mixed with Sensirion’s patented CMOSens® know-how, to ship superior repeatability and long-term stability. This implies the sensor factor, sign processing, and digital calibration are all built-in onto a single tiny chip.
Unlock centimeter-level positioning with full tilt compensation utilizing the SparkPNT ZED-X20P & IM19 GNSS Flex Module. That is considered one of our most superior modules within the GNSS Flex collection, combining the ZED-X20P all-band RTK GNSS receiver with the high-precision IM19 IMU for correct navigation in probably the most demanding functions.
Like all SparkPNT GNSS Flex Modules, this and the following two boards are designed to be simply swappable and pin-compatible for future upgrades. They hook up with your GNSS Flex pHAT provider board by way of standardized 2×10-pin headers, which escape the module’s set of interfaces, together with USB, twin UARTs, and I²C for the GNSS receiver, in addition to devoted UARTs for the IMU.
Obtain centimeter-level positioning with the following era of high-precision GNSS utilizing the SparkPNT ZED-X20P GNSS Flex Module. This module options the most recent u-blox X20 engine, the highly effective successor to the favored F9 engine, making it the perfect selection for demanding navigation and management functions.
Harness the facility of Quectel’s superior GNSS know-how with the SparkPNT LG290P & IM19 GNSS Flex Module. This all-in-one module pairs the strong, quad-band LG290P RTK receiver with our confirmed IM19 IMU, delivering centimeter-level accuracy with full tilt compensation and superior anti-jamming efficiency.
The Pololu D42V55F24, D42V55F8, and D42V55F5.3 are compact synchronous step-down (buck) switching regulators that take enter voltages from 24V as much as 60V, 8.4V as much as 60V, and 5.3V as much as 60V (respectively) and delivers a tightly regulated 24V output at as much as 4A, 8.4V output at as much as 5A, and 5.3V output at as much as 6A (once more, respectively). A step-down converter reduces the next enter voltage to a decrease output voltage whereas rising obtainable present and doing a lot extra effectively than a linear regulator; this implies much less warmth and higher power use in high-difference functions.
The FS3000-1005 is a surface-mount sort air velocity module that makes use of a MEMS thermopile-based sensor. The FS3000-1005 has a variety of 0-7.23m/s (0-16.17mph). The FS3000-1005 incorporates a digital output with 12-bit decision. The sensor includes a “stable” thermal isolation know-how and silicon-carbide coating to guard it from abrasive put on and water condensation.
Haptic Driver – DA7280 (SMD)
COM-29759
The DA7280 is a linear resonant actuator (LRA) and eccentric rotating mass (ERM) haptic driver providing automated closed-loop LRA resonant frequency monitoring. The function ensures consistency throughout LRA manufacturing tolerances, working temperature, growing old, and mechanical coupling. DA7280 gives wideband operation that totally makes use of the capabilities of newer wideband and multi-directional LRAs.
That is it for this week at SparkFun. As at all times, we won’t wait to see what you make! Shoot us a tweet @sparkfun, or tell us on Instagram, Fb or LinkedIn. Please be protected on the market, be type to at least one one other! Glad hacking!
By no means miss a brand new product!
