The brand new SparkFun Spectral Sensor – AS7343 (Qwiic) is now accessible with two new Raspberry Pi Pico boards and extra!
Whats up everybody and welcome again to a different Friday Product Put up right here at SparkFun Electronics! We have now a HUGE week this week and we’re going to begin off with the brand new SparkFun AS7343 Qwiic Spectral Sensor, a brand new 14-channel NIR and visual spectrum board that permits customers to measure gentle simply! Following that we’ve two new Raspberry Pi Pico 2’s, every with headers and accessible in wi-fi and non-wireless choices. We wrap the day with a brand new Twin-Ganged Potentiometer with Rotary Change and ceramic antennas. Alright, let’s leap in and take a more in-depth have a look at all of this week’s new merchandise!
Get the “Spec”tacular Lowdown on the SparkFun AS7343 Qwiic Spectral Sensor!
The SparkFun AS7343 Qwiic Spectral Sensor permits customers to measure gentle in each the seen spectrum (VIS) and near-infrared (NIR) ranges, all on a single IC in a compact bundle. The AS7343 reveals distinctive sensitivity throughout its sensing spectrum (~380nm to 1000nm) and operates reliably in low-light environments, together with when measuring by way of tinted glass. It really works properly for measuring mirrored, emitted, and transmitted gentle, making it a wonderful answer for spectroscopy purposes, equivalent to shade matching, spectral signature evaluation, and extra.
Raspberry Pi Pico 2 with Headers
DEV-29127
Raspberry Pi Pico 2 W with Headers
DEV-28830
The Raspberry Pi Pico 2 sequence of microcontroller (accessible each with and with out wi-fi capabilities) boards is constructed on RP2350: a high-performance, safe microcontroller. With a better core clock velocity, double the on-chip SRAM, double the on-board flash reminiscence, extra highly effective Arm cores, elective RISC-V cores, new security measures, and upgraded interfacing capabilities than the earlier model. These variations of the Pico 2 include headers pre-soldered to the board. Making issues like breadboarding a lot simpler.
An adjustable potentiometer can open up many fascinating consumer interfaces. Flip the pot and the resistance adjustments. Join VCC to an outer pin, GND to the opposite, and the middle pin could have a voltage that varies from 0 to VCC relying on the rotation of the pot. Hook the middle pin to an ADC on a microcontroller and get a variable enter from the consumer!
GPS Antenna – TE Puck PCB Mount
GPS-29202
This floor mount GPS puck antenna has a 16mm diameter and 6.05mm top. It has a frequenct vary of 1565MHz ~ 1585MHz. Small type issue permits use in nearly any wi-fi machine.
Molex Dice PCB Mount Antenna
GPS-29203
That is one other floor mount dice GPS antenna from Molex. It has a frequency vary of 1.556GHz ~ 1.607GHz.
Ceramic Chip Antenna – W3062A
GPS-29205
The W3062A is a low profile ceramic chip antenna from Pulse Electronics. It sports activities a frequency vary of 1.565 ~ 1.585GHz. It’s low-profile, absolutely SMD appropriate, and weighs in at solely 86mg!
This can be a small 3x5x4mm floor mount molded GPS antenna from Molex. It has a frequency vary of 1561 – 1602 MHz. It gives superior sign processing and ground-independence over a variety of navigation and monitoring purposes.
This ultimate low-profile ceramic chip GPS antenna from Molex has a frequency vary of 1.561GHz ~ 1.602GHz and is without doubt one of the smallest choices we’ve in our catalog!
Zener Diode – BZT52, 3.6V, 200mW
COM-29207
Zener diodes are semiconductor gadgets that permit present to stream in each instructions however focus on present flowing in reverse. This diode is rated at 3.6V with 200mW.
Lastly this week, this can be a 16-pin floor mount twin contact 0.5mm pitch ZIF FPC connector.
That is it for this week at SparkFun. As at all times, we will not wait to see what you make! Shoot us a tweet @sparkfun, or tell us on Instagram, Fb or LinkedIn. Please be protected on the market, be type to 1 one other! Blissful hacking!
By no means miss a brand new product!
