Quite a lot of electromagnetic compliance (EMC) testing options—standalone devices, software program, and techniques—can be on show at Rohde & Schwarz’s sales space throughout IEEE EMC Europe 2025 symposium held at Sorbonne Université in Paris from 1-5 September 2025.
Begin with HF1444G14, the brand new high-gain electromagnetic interference (EMI) microwave antenna overlaying 14.9 to 44 GHz. It is going to be paired with the corporate’s ESW EMI take a look at receiver to reveal full compliance testing with a single measurement. The ESW EMI take a look at receiver, boasting an FFT bandwidth of as much as 970 MHz, facilitates measurements of CISPR frequency bands C and D in a single sweep.
Determine 1 The ESW EMI take a look at receiver gives a large measurement bandwidth and excessive dynamic vary. Supply: Rohde & Schwarz
Subsequent, the EPL1007 EMI take a look at receiver, supporting frequency ranges as much as 7.125 GHz, may be both used for EMI pre-compliance testing or as a CISPR 16-1-1 compliant receiver. It’s a conveyable system that may function on batteries, which makes it appropriate for a variety of testing environments.
Determine 2 The EPL1007 EMI take a look at receiver is appropriate for performed and radiated measurements. Supply: Rohde & Schwarz
Then there may be the ELEKTRA take a look at software program, which automates EMC testing for EMI and electromagnetic susceptibility (EMS) measurements of an gear underneath take a look at (EUT). The software program simplifies take a look at configuration, hastens take a look at execution, and generates complete take a look at experiences. Rohde & Schwarz will reveal new options of this take a look at software program, together with the newest capabilities for immunity testing in reverberation chambers.
Determine 3 The ELEKTRA take a look at software program captures your entire system to measure EMI emissions and EMS immunity. Supply: Rohde & Schwarz
Furthermore, the Munich, Germany-based take a look at and measurement firm may also reveal EMI debugging on its oscilloscopes and probing options. Rohde & Schwarz’s MXO 5 oscilloscopes—that includes an replace charge of greater than 4.5 million wfms/s and greater than 45k FFT/s for spectrum evaluation—can be paired with the remoted probing system RT-ZISO to permit customers to debug digital and energy digital gadgets shortly.
Rohde & Schwarz may also current 4 technical classes on the convention.
Associated Content material
- EMI take a look at concerns for energy provides
- EMC pre-compliance testing ups success charge
- Avoiding EMC Failure Via Pre-Compliance Testing
- EMC antennas for troubleshooting and pre-compliance testing
- EMI emissions testing: peak, quasi-peak, and common measurements
The put up EMC compliance spanning devices, software program, and techniques appeared first on EDN.
