E3D HotEnd Comparability Information | MatterHackers

Usually imitated, however by no means duplicated, E3D HotEnds are the results of superb engineering. They’re the envy of sizzling finish makers in every single place as a result of E3D has someway discovered the profitable design, machined to perfection. Purchase an off-brand replication on eBay, and chances are high good that you just’ll remorse it because of the vendor’s incapability to recreate the precise specs that E3D has gone to such lengths to get excellent.

Consequently, E3D HotEnds are the popular improve for the techs right here at MatterHackers, and we wholeheartedly suggest them, in addition to their many nozzle replacements, to our prospects.

The versatile E3D v6 All-metal HotEnd

E3D v6 HotEnd

The E3D v6 is the quintessential improve to any printer that’s sizzling finish merely isn’t performing. If clogs are a continuing downside for you, and also you’ve tried every little thing below the solar, swap to a v6 and watch your troubles soften away.

Tech Specs: 

• Temperature Vary:
• Filament Measurement: 1.75mm or 3.00mm
• Nozzles: 1
• Development: All-metal
• Drive system: Bowden or Direct

E3D Lite6 HotEnd

Should you’re on the lookout for a primary sizzling finish that may print PLA or ABS filament, the Lite6 is a less expensive different to the v6. It’s acquired PTFE components, so it prints as much as 245°C. It appears to be like nearly equivalent to the v6, however the warmth sink has a barely totally different form and the fan shroud is a distinct shade.

E3D Lite6 HotEnd

E3D Cyclops HotEnd

For dual-extrusion printing with a lighter sizzling finish, the Cyclops is a novel setup. It options two inputs for 2 totally different colours of filament, and one output. That is helpful for machines like delta printers the place additional weight on the top effector platform can negatively have an effect on prints. Temperature is shared, so just one sort of filament (e.g. PLA) can print at one time.

Cyclops is the one system from E3D that makes use of its personal sort of nozzles, which aren’t suitable with the opposite sizzling ends.

E3D Cyclops HotEnd

Tech Specs: 

• Temperature Vary:
• Filament Measurement: 1.75mm solely
• Multi-extrusion: 2 filaments of the identical sort
• Nozzles: 1
• Development: All-metal
• Drive system: Bowden solely

E3D Chimera HotEnd

For multi-extrusion printing with the power to individually management temperatures on every of the 2 nozzles, the Chimera is what you need. One massive warmth sink cools the chilly part for each extrusions, which can be utilized to print totally different colours or forms of filament.

E3D Chimera HotEnd

Tech Specs: 

• Temperature Vary:
• Filament Measurement: 1.75mm solely
• Multi-extrusion: 2 differing kinds or colours of filaments
• Nozzles: 2
• Development: All-metal
• Drive system: Bowden solely

E3D Kraken HotEnd

The Kraken has 4 inputs and outputs for the last word multi-extrusion expertise. It’s water-cooled, so it doesn’t use any followers like the opposite sizzling finish programs from E3D. Assist for this technique remains to be fairly restricted, although, and is advisable just for superior customers.

E3D Kraken HotEnd

Tech Specs: 

• Temperature Vary:
• Filament Measurement: 1.75mm solely
• Multi-extrusion: 4 differing kinds or colours of filaments
• Nozzles: 4
• Development: All-metal
• Drive system: Bowden solely

E3D Volcano HotEnd Improve

To print extra filament, sooner, you need the Volcano. Not technically its personal sizzling finish system, it’s an improve to the v6, Chimera, or Kraken, however positively value mentioning. The warmth block and nozzle are each larger, so you may feed extra filament via at a faster fee.

E3D Volcano HotEnd Improve Equipment

Conclusion

Should you’re after high-quality prints, the E3D HotEnds are the only option! As all the time, we’re comfortable to reply any questions you could have, and look ahead to serving to you with all of your printing wants.