Though the DJI Flip is a really new drone (as of this text’s writing), having been launched in January 2025, it has already acquired a number of firmware updates.
For these new to drones typically, firmware updates are crucial for drones. It’s because they oftentimes implement efficiency enhancements, add new options, and handle and repair bugs that in any other case hamper a superb flight expertise.
This text and YouTube video function step-by-step guides displaying easy methods to replace the DJI FlySafe Databases and firmware on the DJI Flip and DJI RC 2 distant controller.
Updating the Flip’s Firmware
For individuals who have been flying drones for some time, staying with a drone’s unique launch firmware was a standard observe, a observe we likewise adopted.
This was primarily as a result of the firmware updates then would oftentimes break a characteristic or trigger the drone to fly inconsistently. With newer drones, just like the Flip, updating the firmware is useful.
As talked about, new options, tweaks, and fixes are added over time. These updates enhance the general consumer expertise.
DJI has been fairly dedicated to bettering the flight traits of their new line of drones, frequently.
To replace the firmware in your DJI Flip, you’ll want your:
- DJI Flip and put in battery
- DJI distant controller (on this occasion the DJI RC 2)
Moreover, we propose that any time you run a firmware replace in your drone, have the Flip batteries and distant controller absolutely charged earlier than working firmware updates.
The steps to replace the firmware in your Flip are as follows:
STEP 1: Earlier than turning on the DJI Flip, take away the gimbal and silicone digicam covers. This can be sure that when the Flip is turned on, the gimbal’s motion won’t be impeded and trigger errors.
STEP 2: After booting up your DJI RC 2, be sure to are related to a WiFi community. To verify this, go into your settings display screen by double-sliding down the notification shade. In case your WiFi isn’t enabled, faucet the WiFi icon and await a connection.
If you’re connecting to WiFi for the primary time, press and maintain the WiFi icon. This can carry you into the WiFi settings. Right here you may connect with your most popular community.
STEP 3: Activate the Flip. Press, then press and maintain the ability button.
Notice: If in case you have not modified the “energy on when unfolded choices” within the DJI Fly app, ignore this step.
STEP 4: From inside the Digicam View display screen, press the again button, which can take you to the Flip residence display screen.
Right here you will notice that there’s a firmware replace accessible. Select Replace.
Through the replace course of, the lights on the Flip will flash. The DJI RC 2 may reboot itself. You may be alerted when the replace is full.
Notice: Oftentimes, the Flip might not restart itself after the Replace is full. You’ll have to manually energy it on afterward to start flying.
Manually Checking for Firmware Updates
If in case you have not been prompted robotically that there’s a new firmware accessible, you may manually verify for updates, by doing the next:
With the DJI RC 2 turned on and related to your WiFi community, whereas on the DJI Fly residence display screen, merely go to Profile > Settings > Firmware Replace > Test for Firmware Updates.
After the DJI RC 2 checks for the replace, if there may be none, you’ll obtain a message saying “Your firmware is updated”.
If there’s a new firmware replace, you’ll be alerted and could have the choice to run the replace.
Updating the FlySafe Database
Firstly, what’s FlySafe knowledge?
Instantly from DJI: “FlySafe knowledge is designed to assist pilots higher perceive flight dangers, make knowledgeable selections, and mitigate security dangers by figuring out restricted and prohibited geographic areas. DJI supplies automated updates to such knowledge based mostly on native rules and inside danger evaluation. The completeness, accuracy, and effectiveness of the info are usually not assured, and such knowledge must be used for reference solely.”
Like with firmware updates, updating the FlySafe Database is a very simple course of.
To replace the Flip’s FlySafe Databases:
STEP 1: Earlier than turning on the DJI Flip, take away the gimbal and silicone digicam covers. This can be sure that when the Flip is turned on, the gimbal’s motion won’t be impeded and trigger errors.
STEP 2: After booting up your DJI RC 2, be sure to are related to a WiFi community. To verify this, go into your settings display screen by double-sliding down the notification shade. In case your WiFi isn’t enabled, faucet the WiFi icon and await a connection.
If you’re connecting to WiFi for the primary time, press and maintain the WiFi icon. This can carry you into the WiFi settings. Right here you may connect with your most popular community.
STEP 3: Activate the Flip. Press, then press and maintain the ability button.
Notice: If in case you have not modified the “energy on when unfolded choices” within the DJI Fly app, ignore this step.
STEP 4: From inside the Digicam View display screen, press the again button, which can take you to the Flip residence display screen.
STEP 5: If there’s a FlySafe Database Replace accessible, it would present on the DJI Fly homescreen.
Press Replace and the FlySafe Database will proceed to replace.
The method solely takes a minute or two and shouldn’t restart your DJI Flip.
