I’ve been having issues with my MacBook Air (Early 2015). Since putting in an replace to 10.13.6 (From 10.13.3, I imagine) the pc freezes as soon as the progress bar fills up on the login display. Rebooting has not resolved the problem. I’ve tried to enter protected mode and restoration mode (Command-R); the consequence is similar, and the pc is not going to transition to the restoration mode interface.
Possibility-command-R and Shift-option-command-R generate error messages -5101 and -2003 respectively, which don’t appear to be typically cited on these boards. Equally, a PRAM/NVRAM reset has been unhelpful.
Single person mode (Command-S) works tremendous, however I haven’t discovered any set of instructions which has mounted my downside. Verbose mode is inconclusive, and the textual content stops updating after a minute or two, apart from ‘busy timeout ‘IGPU’’ messages. I’ve additionally thought-about that this can be a {hardware} situation, however have by no means skilled issues with this laptop computer earlier than.
Has anybody skilled one thing like this earlier than or does anybody have a attainable answer?
Cheers
Edit: Connected are two photos of the ultimate display earlier than timeout messages begin occurring. The command line doesn’t appear solely constant every time I begin it up: some further messages appeared right here. Sadly, it doesn’t let me put up a video.
Notice: the picture on the backside is of the newest state of the display.
Relating to Goal Disk mode, I don’t have a second pc available proper now, however I’d be capable to set that up within the close to future. I don’t have an exterior show.)
UPDATE 2:
![enter image description here]
(https://i.sstatic.web/04dfs.jpg)
These are logs after coming into the command ‘exit’. I obtained IGPU messages after this; this time although, the syntax is ‘kextd stall, (240s): ‘IGPU’. Hopefully that is useful, however from what I perceive it might imply any variety of issues. Presumably the AppleKeyStore messages are additionally helpful?
-
I now have entry to a different pc. Since this mode is usually used to get information from a Mac, what particularly ought to I be looking for?
-
As I discussed initially, ‘Possibility-Command-R’ and ‘Shift-Possibility-Command-R’ don’t work both: I’ve since tried them once more, and ‘Possibility-Command-R’ returns error message -5101 (after typing in right web password). ‘Shift-Possibility-Command-R’ boots into Web Restoration (with the spinning globe), however then appears to return to the login display, which is at all times a lifeless finish.
So I suppose I must be in search of any repair to this which doesn’t require the login display to take impact. I haven’t been capable of finding an answer permitting me to reinstall macOS and bypass restoration mode – is that attainable?
EDIT: When the Mac is on, I additionally sporadically get the voiceover message ‘To decide on English as your foremost language, press the ‘return’ key…’ I feel this has one thing to do with restoration mode.
