We’re specializing in additive manufacturing enterprise information as we speak, as each Velo3D and PostProcess Applied sciences introduced adjustments to their Boards of Administrators. Sandvik Metallic Powder has a brand new president, and Klas Magnus Boivie was honored with ASTM Worldwide’s prime annual award for his work on the F42 Committee. Lastly, St. Petersburg, Florida is now house to what’s been referred to as the world’s largest 3D printing manufacturing unit, which was based by a reputation that could be acquainted to many within the AM trade.
Velo3D Broadcasts Two New Members Becoming a member of Board of Administrators
L-R: Jason Lloyd & Kenneth Thieneman
Metallic additive manufacturing (AM) agency Velo3D has introduced some adjustments to its Board of Administrators. On April twenty second, Michael Idelchik and Velo3D’s COO Brad Kreger each resigned from the Board. Then, Retired Navy Rear Admiral Jason Lloyd and Kenneth Thieneman have been each appointed to the Board, efficient April twenty fourth. Since final August, Lloyd has been the Vice President of of Maritime Engineering and Design for TotalTek, which supplies know-how options in digital transformation, maritime engineering, venture administration, and SAP. Beforehand, he served as chief engineer at Naval Sea Programs Command (NAVSEA), and held a number of positions at Newport Information Shipbuilding. Thieneman is Founder and CEO of Thieneman Development, Inc., a self-performing environmental normal contractor that makes a speciality of water and wastewater remedy tasks. Previous to that, Thieneman held a number of positions at Bowman Engineering, and he’s additionally the co-inventor and VP Operations of Algaewheel, the world’s most commercially superior algal wastewater remedy know-how. With the entire important purposes Velo3D works with, Lloyd and Thieneman will likely be an amazing match for the Board.
“We’re excited to welcome Jason and Ken to our Board. Jason’s expertise in maritime engineering and design in addition to his acknowledged management in the US Navy will show invaluable as we additional develop our protection trade efforts whereas Ken’s operational and monetary ability set as CEO of Thieneman Development will likely be important as we proceed to execute on our new go-to-market development technique,” mentioned Arun Jeldi, the CEO of Velo3D. “Lastly, I want to thank Brad and Michael for his or her dedication and repair to Velo3D over the past yr as they’ve been instrumental in serving to place the corporate for future success.”
PostProcess Applied sciences Welcomes New Board of Administrators Member
Jonathon Casey
New York and Paris-based PostProcess Applied sciences, a prime supplier of automated post-printing options for AM, introduced a change to its Board of Administrators as properly. Jonathon Casey, who at present serves as Govt Vice President, Chief Integration Officer, and Chief Provide Chain Officer at world medical machine producer Nissha Medical Applied sciences, is the most recent member of the Board at PostProcess. Nissha Medical Applied sciences is a completely owned subsidiary of Nissha Co., Ltd., and makes a speciality of progressive affected person monitoring and surgical options. Casey has greater than 15 years of management expertise throughout advertising, gross sales, and operations within the medical machine, laboratory, and know-how sectors, specializing in constructing scalable infrastructure, integrating acquisitions, and aligning industrial and provide chain technique. He’s helped to advance strategic development at Nissha Medical via world partnerships, mergers and acquisitions, and natural initiatives, and is thrilling to assist PostProcess “as they proceed to speed up innovation” within the AM trade.
“Jonathon brings a wealth of strategic management and world operations experience to our Board. His expertise scaling complicated companies and driving innovation will likely be invaluable as we proceed to develop our affect because the leaders in automated post-printing within the additive manufacturing trade,” mentioned Jeff Mize, the CEO of PostProcess Applied sciences.
Sandvik Metallic Powder Names New President of Powder Options
David Goulbourne
The Sandvik Group has thrilling information to share about its Powder Options division, which belongs to the Sandvik Manufacturing and Machining Options enterprise space. David Goulbourne is the brand new President of the division, taking up for Alex Nieuwpoort as he retires after 28 years of service and contributions to Sandvik’s enterprise improvement and total development. This transformation is efficient as of Might 1st, although Nieuwpoort will stay with the corporate till the top of June. Sandvik Manufacturing and Machining Options is a number one producer of tooling techniques and instruments for superior industrial metallic slicing, and likewise contains the areas of metallic powder and digital manufacturing options. The Powder Options division contains Sandvik’s Osprey line of supplies, in addition to manufacturers like Wolfram and Buffalo Tungsten, of which Goulbourne may even be the President. He has almost 25 years of expertise within the manufacturing trade, and was beforehand Vice President Enterprise Unit Strong Spherical Instruments at Sweden’s Sandvik Coromant.
“I’m thrilled to hitch the Powder Options division and contribute to strengthening and increasing our management within the powder manufacturing trade,” Goulbourne mentioned. “My focus will likely be on guaranteeing that buyer worth stays our prime precedence, by constantly creating extra sustainable processes and high-quality powder options.”
ASTM Worldwide Presents Prestigious Annual Award
This week, ASTM Worldwide offered the 2025 Award of Advantage to longtime member Klas Magnus Boivie. That is the group’s prime annual award, and contains the accompanying title of fellow. The Award of Advantage is the best recognition that the worldwide requirements group may give to its members for excellent participation and distinguished service to its many committee actions. Boivie, who’s been a member of ASTM since 2009, obtained the away for his many contributions to the group’s Committee F42 on Additive Manufacturing Applied sciences. He served on ASTM’s Board of Administrators from 2019-2021, and is definitely a founding member—and the present Recording Secretary—of the F42 committee, which was fashioned the identical yr he grew to become a member of ASTM. He was beforehand honored by the committee in 2018 with the Additive Manufacturing Connection Level, the Board of Administrators Service Award in 2021, and the Frank W. Reinhart Award in 2022.
Boivie earned his doctoral diploma in manufacturing know-how from the Royal Institute of Know-how (KTH) in 2004. He’s labored with many facets of AM know-how all through his profession, together with new course of improvement and industrial purposes. He’s been centered on supporting industrialization of AM since 2007, which led him to worldwide requirements improvement. The CEO, Founder, and Head of Analysis at consultancy Additvantage AB, Boivie additionally participates within the coordinated actions for AM standardization throughout the ISO/TC 261 Committee on Additive manufacturing, serving as Convenor for Work Group 1 on Terminology. He was acknowledged by ASTM for the 2025 Award of Advantage as a result of his “unrelenting management, excellent contribution, and distinctive productiveness in creating additive manufacturing requirements.”
World’s Largest 3D Printing Manufacturing facility Opens in St. Petersburg, Florida
One of many 3D printing robots contained in the Haddy facility | Courtesy of St. Pete Rising
In St. Petersburg, Florida, furnishings startup Haddy, powered by synthetic intelligence, machine studying and CEAD‘s large-format robotic 3D printers, has opened its first microfactory—a 32,000-square-foot facility that’s truly mentioned to be the world’s largest 3D printing manufacturing unit, primarily based on whole throughput and machine depend. Haddy was launched in 2022 by a reputation you may acknowledge: Jay Rogers, a U.S. Marine Corps veteran who additionally based motorized vehicle manufacturing firm Native Motors, which created the 3D printed electrical Strati automotive, the autonomous 3D printed Olli bus, and a number of other different progressive autos earlier than closing its doorways only a yr earlier than Haddy was based. However Rogers informed St. Pete Rising that the roots for Haddy have been first laid in 1995, after he “first examine what may very well be carried out with an internet-powered machine.” The startup, which employs a dozen individuals, makes use of eight robots to print furnishings and different merchandise (like chilly plunge tubs) utilizing supplies repurposed from previous fishing nets and plastics. Haddy’s automation software program comes from Siemens AG; Dr. Karsten Heuser, vp of additive manufacturing at Siemens, truly flew to Florida from Germany to attend the microfactory’s grand opening final month.
For years, American corporations have outsourced their manufacturing must nations like China with a lot decrease labor prices. Now, tariffs and commerce wars are inflicting many to give attention to reshoring, however constructing new manufacturing services within the U.S. would take an excessive amount of money and time. Rogers believes that strategically shifting manufacturing nearer to focus on markets, or proximate manufacturing, is the reply. He says that Haddy plans to open microfactories, just like the one in St. Petersburg, all around the world. A world community of those microfactories with automated, constantly studying robots might assist keep away from provide chain disruptions and commerce points, whereas efficiently printing customizable merchandise on-demand. Rogers informed Catalyst that Haddy’s merchandise will “be made native, all around the world, and related by the web.” In certainly one of its first tasks, the startup efficiently produced a 3D printed espresso bar in a day for native enterprise Paradeco Espresso Roasters, which misplaced its conventional bar and furnishings throughout Hurricane Ian in 2022 and couldn’t afford to lose extra income ready for conventional suppliers. Since then, it’s secured offers with each impartial patrons and main retailers—no marvel St. Pete’s Mayor Ken Welch referred to as the microfactory’s grand opening a significant milestone for the town!
Subscribe to Our E mail E-newsletter
Keep up-to-date on all the most recent information from the 3D printing trade and obtain data and gives from third get together distributors.
Add your 3D Fashions and get them printed rapidly and effectively.
