🎃 Construct-a-Gnome Halloween Add-On STL Bundle – Pumpkin and Witch Hat・ STL File for 3D printing・Cults

🎃 Construct-a-Gnome Halloween Add-On STL Bundle – Pumpkin & Witch Hat 🧙‍♂️
Convey spooky allure to your gnome assortment with this Halloween Add-On Bundle – specifically designed for the Construct-a-Gnome base mannequin (bought individually). Excellent for Halloween decor, fall shows, or festive shelf sitters!
This seasonal bundle consists of:
– A basic Jack-o’-Lantern pumpkin – prepared for methods or treats!
– A whimsical Witch’s Hat – spooky and trendy!
Vital: This itemizing consists of STL information just for the hat and pumpkin. You should personal or buy the Construct-a-Gnome Base Mannequin to make use of this bundle.

Options:
– NO AMS NEEDED: This mannequin is designed to print by piece and coloration! You don’t want an AMS to print this mannequin which additionally means it prints quicker and with a lot much less wasted filament.
– Modular Meeting: All base items are engineered to suit collectively simply*, making meeting easy and satisfying. This additionally means that you can use this base mannequin with the add-ons without having to reprint components you’ve got already made! The items with every add-on will match seamlessly with the bottom gnome. Minimal glue wanted for some equipment for everlasting maintain.*
– **Industrial License Included: Promote your completed prints with confidence — license included with buy, no subscription required!

Included in This Itemizing:
– STL information for the pumpkin and witch hat (as proven within the photograph)
– Clear, support-light design optimized for simple printing
– Industrial license included — no subscription or further charges wanted
Whether or not you are adorning your house or promoting seasonal objects, this modular gnome is a must have mission on your 3D print lineup. Begin your assortment immediately and let your gnome evolve with each season!

SAFETY NOTE: This mannequin accommodates small components which will current a choking hazard. It’s not appropriate for younger kids or pets. For adornment functions solely.

👻 Add a bit of Halloween magic to your gnome immediately – and examine again typically, the Construct-a-Gnome assortment is at all times rising!

Meeting Notice
A number of the accent items could have tight suits to carry components collectively with out glue. In case you have points with match, please be at liberty to achieve out to me and I might be comfortable to help you. In case your machine doesn’t have very exact or correct tolerances, it’s possible you’ll wish to scale the fashions up or modify your precision settings. Cutting down mannequin is not going to work because the tolerances will probably be too small for the items to suit.

For many equipment for this gnome, you can be required to take away a hand or arms to position the accent within the gnome’s arms. Glue isn’t wanted for a lot of the components of those fashions. We do suggest it whenever you need everlasting adhesion of for sure small components.
Print tolerances differ by printer. The settings used on this print had been in Bambu Studio, and printed on a Bambu X1C utilizing a 0.4 nozzle printed at 0.20mm layer peak Customary print high quality settings. Filament used was PLA and PLA+. Plate used was Bambu Textured PEI Plate.
Including variable peak, ironing or smaller layer heights will lower the visibility of any strains much more than what’s proven within the pictures.
Beneficial Print Settings:
– Helps – YES for some components
– Assist Kind – TREE SLIM
– Helps on Construct Plate Solely
– Threshold Angle – 30 levels
– Take away Small Overhangs – NO
– Brim – YES – Solely on small items or if in case you have adhesion points
– Prime Z-Distance – .28
– Backside Z-Distance – .28
– Layer Top – 0.2mm or smaller
– Nozzle Dimension – 0.4 or smaller
– Seam – place depends upon piece and orientation on the plate
– Infill – 10 – 15%
– Wall Loops – 2